Thorens TAS 1600

MC-pickup som är specialgjord till Thorens. 0,4mV och 12 ohm gör att den passar de flesta RIAA. Special Line contact slipning med nålrör i boron.

12 990 kr
Lägg i varukorgen
Leverantörslager (Vanligtvis 2-6 arbetsdagar om varan finns tillgänglig hos leverantören)
Fri frakt vid köp över 300 kr!
Garanti i 24 månader
Mer produktinformation

Thorens TAS 1600

The newly developed Thorens "TAS 1600" cartridge is a Japanese-made low output MC that was specially developed for the THORENS TD 1600 and TD 1601. With an output voltage of 0.4 millivolts at 5.5 cm / s, it delivers sufficient levels to harmonize with common phono preamplifiers.

With an internal resistance of 12 ohms, it feels in good hands at a terminating resistor of> 100 ohms. At the end of a massive boron cantilever sits a fine diamond with a line-contact cut, which elicits every musical fineness of the record groove.

Specifikationer:
  • Model TAS 1600
  • Mounting 1/2” centers / Threaded inserts
  • Frequency Response 20 - 50,000 Hz
  • Body Aluminium
  • Channel Separation 28 dB (1 kHz)
  • Output Channel Balance 0.5 dB (1 kHz)
  • Output Voltage 0.4 mV (1 kHz, 5 cm/sec)
  • Vertical Tracking Angle 20 degrees
  • Tracking force, recommended 1.8 to 2.2 g (standard 2.0 g)
  • Stylus Shape Special Line Contact
  • Stylus Size 1.5 x 0.28 mil
  • Stylus Construction Nude rectangular shank
  • Cantilever 0.28 mm Ø nude boron
  • Coil Impedance 12 Ohms (1 kHz)
  • Coil Inductance 25 μH (1 kHz)
  • DC Resistance 12 Ohms
  • Static Compliance 22 x 10 – 6 cm / dyne
  • Dynamic Compliance 18 x 10 – 6 cm / dyne (100 Hz)
  • Terminal Pins Brass
  • Wire Used for Coil PCOCC (Copper by Ohno Continuous Casting process)
  • Recommended Load Impedance min 100 Ohms
  • Cartridge Weight 8.2 g
Modell
TAS 1600
Varumärke
Jämför produkt
Dela produkt

Thorens